You might assume that it’s okay to use any kind of chair for sewing. But the keen sewing enthusiasts among us know that’s not the case.
Sewing often involves sitting down for long periods of time, hunching over your sewing machine, or drawing and cutting designs at your sewing table.
Without the right chair, you will most likely experience strained, fatigued muscles. This can eventually result in both neck and back aches of the kind none of us want.
For this reason, along with your comfort, it’s important to invest in a dedicated sewing chair. Choose one that is ergonomically designed to provide you with the comfort level you want, and the support for your muscles and joints you need.
Features to Look for in a Sewing Chair
Before buying a sewing chair, here are a key few features you should look out for.
Backache is one of the most common complaints that both sewing enthusiasts and professionals experience.
This is because without a proper back support in place, most people are inclined to slouch at their workspace. Slouching is detrimental to your back health because it distorts the natural curvature of your spine.
When you slouch, the lower back is pushed outwards towards the chair. Over time, this incorrect posture may strain specific muscle groups, causing those uncomfortable and tedious aches and pains.
As such, having a backrest on your sewing chair will provide your back with much-needed support.
Remember to look for a backrest that is ergonomically designed, with high-quality lumbar support. A good lumbar support will fit your back snugly, and maintain the spine’s natural inward curvature.
When testing out a sewing chair you should sit up straight and then lean back fully into the chair. Make sure you can feel the chair’s backrest flush against the natural curve of your spine.
Adjustable Seat Height
A pneumatic seat-height adjustment is another key feature to look for in a sewing chair.
With a simple lever mechanism, you’ll be able to adjust the height of your chair, and make sure your arms can reach the top of your workspace effortlessly. The right height will also allow you to rest your arms comfortably against the edge of the desk.
This is important to prevent arm and shoulder strains. Such pains may be caused by a mismatch between your seat height and the desk.
As an added bonus, the correct seat height will improve the chances of you adopting a good sitting posture, minimizing the strain on specific muscles.
Finally, when you’re free to adjust your seat height as you please, you can ensure that your feet are able to touch the floor. This one is important for the vertically-challenged among us!
A good sitting posture involves having both feet placed flat against the ground. Make sure there is at least an inch of space between the back of your knees and the seat’s edge.
Since you’ll most likely spend many hours in your sewing chair, comfort should be one of your top priorities.
Choose a chair with sufficient padding on the seat and backrest. Ideally, the padding material is sturdy yet retains some firmness when pressed against.
An ideal option is high-density foam, which does a really good job of keeping your weight supported when you sit on the chair.
Additionally, make sure that the seat cushion is not too firm. As you might have experienced before, sitting on a hard surface for too long results in numbness and general discomfort.
A chair with the right padding is essential to promote blood circulation and relieve pressure points.
While some individuals might prefer their sewing chairs to have armrests, an armless design is usually the more popular choice.
The lack of armrests means you have more space to move your hands around. This is beneficial for sewing, since you will often have to deal with fabrics of various shapes and sizes.
Caster wheels are a mainstay of any sewing chair, as they provide you with much-needed mobility.
Most caster wheels have a 360-degree swiveling function which means that you can move your chair in any direction you want. This effortless movement also reduces the strain on you when it comes to moving the chair.
Before buying a sewing chair, remember to test out the wheels by pushing it back and forth and side to side. This will give you a rough idea of how smoothly the wheels move across a hard surface.
The last thing you want is the dreaded drag that comes with poor-quality wheels. Not to mention the damage they can do to your floors. (Tip – I have a cheap plastic mat under my chair that protects my nice wooden floor.)
Our Top 5 Sewing Chairs
Now that we know which features make up a good-quality sewing chair, let’s check out some of the best ones available on the market.
These chairs vary from one another vastly in terms of their aesthetics, features, and price. So, rest assured that you will definitely find one that’s to your liking.
5: OFM Posture Series Armless Mid Back Task Chair
This mid-priced chair by OFM offers superior posture support that is ideal for long hours of sitting. Its armless design also means that you enjoy more freedom when working on your sewing projects.
To provide you with effortless mobility, this swivel chair is constructed with a sturdy 5-star base and castor wheels. It can also withstand up to 250 pounds in weight.
It has a built-in lumbar support that mimics your back’s natural curvature, which reduces back strain and promotes correct posture. It also comes with an adjustable back height and depth function.
Besides that, the chair has a gas-lift mechanism to customize your preferred seat height. The upholstery also features a stain-resistant fabric, which makes cleaning the chair a breeze.
A drawback for some people with this chair is the firmness of the seat. Some people hate it, while others adore it.
- Built-in lumbar support to correct back posture.
- Adjustable back height, back depth, and seat height.
- A sturdy 5-star base can withstand heavy loads up to 250 pounds.
- Seat cushion may be too firm for some individuals.
- Expensive. At the upper end of the price range, this is not the cheapest chair we’re reviewing here.
- MID BACK TASK CHAIR: Relax comfortably in this fully upholstered task chair with stain resistant fabric that's easy to clean and can...
- ERGONOMIC POSTURE SUPPORT: Built in lumbar support and adjustable back height and depth plus a gas lift seat height adjustment provide added...
- ARMLESS CHAIR: This armless chair is compact for easy relocation and gives the option to freely move around
4: Reliable SewErgo 200SE Ergonomic
This is another ergonomically-designed sewing chair which aims to provide you with maximum levels of comfort and support while you sew.
The chair is designed with contoured cushions that are suitable for long hours of sitting. These cushions are made of the thickest foam padding in the SewErgo product line. So you can rest assured that this chair is going to be well-padded.
A compelling feature of this chair is its seat’s design. It has a waterfall seat edge which gently tapers downwards to reduce the pressure at the back of your thighs. This eliminates the possibility of your legs feeling numb due to a lack of blood circulation in the thigh area.
Another interesting bit of engineering in this chair is that it has glides instead of castor wheels. However, this may not work well on carpeted floors, due to the resulting friction. Thankfully, the glides can be replaced with castor wheels if you prefer.
This SewErgo chair also comes with three adjustments to customize the back and seat height, so that you can work strain-free. One notable feature is the ability to tilt the seat back forward and backward, which prevents you from slouching.
That said, we should note here that the back adjustment knob can be a little hard to reach for some people.
The chair is relatively easy to assemble, compared to others we’ve reviewed. In fact, it can be done in as little as 15 minutes.
- Thickly padded, contoured cushions and a waterfall seat edge maximizes comfort while sitting.
- The chair has three adjustments which you can use to customize the back and seat height.
- Easy to assemble, with clear directions included.
- Glides may not work well on certain floor types.
- Back adjustment knob is hard to reach.
- MADE IN CANADA - The SewErgo 200SE equips sewers with the essential ergonomic features that they require. Our sewing chairs are also...
- BACKREST - Full cloth covered backrest like our best ergonomic chair
- GLIDE EFFORTLESSLY - working properly and safely is simple with the use of glides. The glides work with the operator providing easy...
3: Boss Office Products B315-BE Perfect Posture Deluxe
This is an affordable chair with contoured ergonomics and a capacity to withstand 250 pounds. But this chair from Boss Office Products might be a better choice for petite sewists.
Its armless design has a built-in lumbar support, with adjustable back height and depth to correct your sitting posture. Made of durable tweed fabric, the chair does not feel rough to the touch.
Similarly to the SewErgo, this chair also has a waterfall seat edge to reduce pressure when sitting down for long periods of time.
Its pneumatic adjustment function allows you to customize a seat height between 18.5 and 23.5 inches. This matches the heights of most sewing tables and desks.
The chair is also pretty lightweight, weighing in at only 18 pounds. Additionally, the hooded double caster wheels allow for effortless mobility. This is an easy chair to move from one room to another if you decide to change up your workstation.
Despite its relatively low weight, the chair has a 5-star nylon base to offer you added stability. You won’t need to worry about it toppling over when you get up or sit down.
As mentioned earlier, this seat might be a better choice for small to average-sized users. The seat width is, unfortunately, not very roomy, making it an uncomfortable choice if you’ve got a few curves.
Finally, like others we’ve reviewed here, this chair is easy to assemble in the comfort of your own home and with minimal tools.
- Contoured cushion with waterfall seat edge to improve blood circulation while sitting.
- Built-in lumbar support, with adjustable back height, depth, and seat height.
- Stable 5-star nylon base with hooded double caster wheels.
- Because of the small seat width, this chair is only suitable for individuals of a small to average stature.
- Fabric type: 100% Polypropylene
- Armless task/office chair from Boss with lumbar support; waterfall-contour seat relieves stress to legs
- Nylon, swivel 5-star base with double wheel casters; padded seat covered in durable tweed fabric
2: HON ValuTask Low Back Task Chair
This chair is a “low back” type to provide you with maximum levels of lower back support.
Its unique mesh material is sandwiched with two other layers of cushioned padding. This will keep you cool and comfortable as you sew. However, some might find this fabric a little rough for their liking.
Besides the usual pneumatic height adjustment, this chair is also equipped with two other special functions. One is the tilt tension which is conveniently located on the right side under the chair. This allows you to control the recline of the chair with ease.
The other function is the tilt lock which keeps the chair in an upright position. This reduces the possibility of you slouching. This is especially important given that slouching is one of the main causes of back pains.
Its armless design is complemented by a sturdy 5-star base and casters so that you can easily move around. Be careful when rolling the chair around as the casters are quite slippery.
With that said, this chair is well worth its affordable price tag, due to its other great attributes.
- Mesh material is double-layered with padding to keep you cool and supported.
- Tilt tension allows the chair to recline while the tilt lock secures the chair in an upright position.
- Great for those on a budget.
- The specially fabricated material may feel too rough for some users.
- Wheel casters are very slippery.
- BREATHABLE MESH COMPUTER CHAIR: This work chair's contoured sandwich mesh seat back cushion with two layers of padding keep your body happy,...
- BUDGET FRIENDLY: These task chairs offer excellence without expense so you can stretch your furniture dollar while working in comfort. Chair...
- ERGONOMIC ADJUSTMENTS: Let this comfortable office chair take care of your body while you work with an easy, adjustable recline and...
1: Arrow Height Adjustable Hydraulic Sewing Chair
This stunning hydraulic chair with its higher-end price to match is specifically designed for sewing and other crafts.
It is made with a stylish, yet durable, Riley Blake Sewing Notions fabric, to brighten up your sewing workspace. There are also no armrests to restrict your movements while you sew.
The chair’s height is adjustable with easy-to-use controls, so that you can work comfortably anywhere. The lowest setting is 18 inches while the highest is 22 inches. It also provides you with more than adequate lumbar support.
The star-like base has enhanced stability to support your weight. In addition, the accompanying five casters give you unlimited movement around your crafting station. These casters also glide effortlessly across all floor types, including carpeted ones.
One unique and nifty feature of this chair is that the seat cushion has a hidden storage compartment. This can be used to store all your sewing essentials. But you will have to get up to access them.
- Stylish fabric pattern brightens up the workspace.
- Star-like base structure enhances the chair’s stability.
- Hidden storage compartment beneath the seat cushion.
- Our hydraulic chair is a perfect accessory for any craft and sewing room.
- The chairs vivid heavy duty Riley Blake fabric features a Sewing Motif of a black background on a black chair frame that is sure to match...
- The chair’s height is adjustable with easy to use controls and the cushions provide perfect lumbar support and comfort for those long...
The sewing chair by Boss Office Products is our ‘value for money’ pick. From its ergonomic design to its sturdy base, it checks all the boxes required for a quality sewing chair.
Coupled with its affordable price, this could be the dream chair you are looking for—if you’re the right size, that is. Remember that this chair is better suited to those of a petite to average body size.
But if you’re serious about sewing and have the money to spare, you can’t go wrong with the chair from Arrow.